manualshive.com logo in svg

Vauxhall 2011 Astra, Owner'S Manual

Introducing the Vauxhall 2011 Astra, a remarkable vehicle offering exceptional performance and reliability. To ensure a seamless ownership experience, download the free Quick Manual from manualshive.com, providing you with comprehensive information and instructions. Maximize your driving pleasure with this convenient and user-friendly manual, available for instant download.

Share
Download
background image

166

Vehicle care

Push the safety catch to the right and

open the bonnet.

Secure the bonnet support.

If the bonnet is opened during an

Autostop, the engine will be restarted

automatically for safety reasons.

Closing

Before closing the bonnet, press the

support into the holder.
Lower the bonnet and allow it to drop

into the catch. Check that the bonnet

is engaged.

Engine oil

Check the engine oil level manually

on a regular basis to prevent damage

to the engine. Ensure that the correct

specification of oil is used.

Recommended fluids and lubricants

3

 207.

Check with the vehicle on a level

surface. The engine must be at

operating temperature and switched

off for at least 5 minutes.
Pull out the dipstick, wipe it clean,

insert it to the stop on the handle, pull

out and read the engine oil level.
Insert dipstick to the stop on the

handle and make half a turn.

Different dipsticks are used

depending on engine variant.

Summary of Contents for 2011 Astra
















































































































































































































































Reviews:

No comments

Related manuals for 2011 Astra

IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Saab B205 Installation Instructions Manual preview
B205
Brand: Saab Pages: 10
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Motoalliance VIPER MA11922 Install Instructions Manual preview
VIPER MA11922
Brand: Motoalliance Pages: 8
Opel 2011 Insignia Owner'S Manual preview
2011 Insignia
Brand: Opel Pages: 254
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Brand: Billien Pages: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Brand: Lexus Pages: 28
Gacell SLH 27C User Manual preview
SLH 27C
Brand: Gacell Pages: 25
Kargo Master 40983 Quick Start Manual preview
40983
Brand: Kargo Master Pages: 18
INNO TR163 Installation Instructions preview
TR163
Brand: INNO Pages: 3
Yakima K1198 Instructions Manual preview
K1198
Brand: Yakima Pages: 10
Laser PW-BT50AR Quick Start Manual preview
PW-BT50AR
Brand: Laser Pages: 3

Brands by name

Popular brands

Load more brands