Vauxhall 2011 Astra Owner'S Manual Download

Page: 25 / 239

Keys, doors and windows

the ignition key is removed (manual

transmission) or the selector lever is

moved to P position (automatic

transmission).
Settings can be changed in the menu

Settings in the Info-Display. Vehicle

personalisation

112.

The settings can be saved for the key

being used

21.

Child locks

Warning

Use the child locks whenever

children are occupying the rear

seats.

Using a key or suitable screwdriver,

turn the child lock in the rear door to

the horizontal position. The door

cannot be opened from the inside. For

deactivation turn the child lock to the

vertical position.

Doors

Load compartment

Tailgate

Opening

5-door hatchback
After unlocking, push the touchpad

switch below the handle and open the

tailgate.
Sports tourer
After unlocking, push the touchpad

switch under the tailgate moulding

and open the tailgate.

Summary of Contents for 2011 Astra
















































































































































































































































Search results

Summary of Contents for 2011 Astra

Reviews:

Related manuals for 2011 Astra

Brands by name

Popular brands

Vauxhall 2011 Astra, Owner'S Manual

Search results

Summary of Contents for 2011 Astra

Reviews:

Related manuals for 2011 Astra

Brands by name

Popular brands