Vauxhall 2011 Astra Owner'S Manual Download

Page: 31 / 239

Keys, doors and windows

Automatic anti-dazzle

Dazzle from following vehicles at

night is automatically reduced.

Windows

Manual windows

The door windows can be opened or

closed with the window winders.

Power windows

Warning

Take care when operating the

power windows. Risk of injury,

particularly to children.
If there are children on the rear

seats, switch on the child safety

system for the power windows.
Keep a close watch on the

windows when closing them.

Ensure that nothing becomes

trapped in them as they move.

Switch on ignition to operate power

windows. Retained power off

137.

Operate the switch for the respective

window by pushing to open or pulling

to close.
Pushing or pulling gently to the first

detent: window moves up or down as

long as the switch is operated.
Pushing or pulling firmly to the second

detent and then releasing: window

moves up or down automatically with

safety function enabled. To stop

movement, operate the switch once

Summary of Contents for 2011 Astra
















































































































































































































































Search results

Summary of Contents for 2011 Astra

Reviews:

Related manuals for 2011 Astra

Brands by name

Popular brands

Vauxhall 2011 Astra, Owner'S Manual

Search results

Summary of Contents for 2011 Astra

Reviews:

Related manuals for 2011 Astra

Brands by name

Popular brands