manualshive.com logo in svg

Vauxhall 2011 Astra, Owner'S Manual

Introducing the Vauxhall 2011 Astra, a remarkable vehicle offering exceptional performance and reliability. To ensure a seamless ownership experience, download the free Quick Manual from manualshive.com, providing you with comprehensive information and instructions. Maximize your driving pleasure with this convenient and user-friendly manual, available for instant download.

Share
Download
background image

36

Seats, restraints

Horizontal adjustment

To adjust horizontally, pull the head

restraint forwards. It engages in

several positions.
To return to its rearmost position, pull

fully forwards and release.

Head restraints on rear seats

Height adjustment

Pull the head restraint upwards or

press the catch to release and push

the head restraint downwards.

Removal

Press both catches, pull the head

restraint upwards and remove.

Active head restraints

In the event of a rear-end impact, the

front parts of the active head

restraints are moved slightly

forwards. Thus the head is supported

so that the risk of whiplash injury is

reduced.

Note

Approved accessories may only be

attached if the seat is not in use.

Summary of Contents for 2011 Astra
















































































































































































































































Reviews:

No comments

Related manuals for 2011 Astra

KC HiLiTES C Series Wiring Diagram preview
C Series
Brand: KC HiLiTES Pages: 4
Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
Pivot DXB-B User Manual preview
DXB-B
Brand: Pivot Pages: 4
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
Webasto Transit Vancouver Wagon Manual preview
Transit Vancouver Wagon
Brand: Webasto Pages: 44
AA Products SR-A260 Instruction Manual preview
SR-A260
Brand: AA Products Pages: 4
BrandMotion FLTW-7690 Installation Instructions preview
FLTW-7690
Brand: BrandMotion Pages: 2
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
Vauxhall Meriva 2014 Infotainment Manual preview
Meriva 2014
Brand: Vauxhall Pages: 131
BMW 51 47 0 027 792 Installation Instructions Manual preview
51 47 0 027 792
Brand: BMW Pages: 7
Ford 2007 Navigator (Spanish) Owner'S Manual preview
2007 Navigator
Brand: Ford Pages: 728
Westin 58-53935 Installation Instructions preview
58-53935
Brand: Westin Pages: 5
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33
Whispbar K481W Fitting Instructions Manual preview
K481W
Brand: Whispbar Pages: 14
Skoda FABIA II TMB PS 035 Mounting And User Instructions preview
FABIA II TMB PS 035
Brand: Skoda Pages: 16

Brands by name

Popular brands

Load more brands