manualshive.com logo in svg

Vauxhall 2011 Astra, Owner'S Manual

Introducing the Vauxhall 2011 Astra, a remarkable vehicle offering exceptional performance and reliability. To ensure a seamless ownership experience, download the free Quick Manual from manualshive.com, providing you with comprehensive information and instructions. Maximize your driving pleasure with this convenient and user-friendly manual, available for instant download.

Share
Download
background image

134

Climate control

Direct the flow of air by tilting and

swivelling the slats.
To close the vent, turn the adjuster

wheel towards the smaller 

W

 symbol.

Comfort mode 

;

Using the comfort mode the air flow is

distributed smoothly in diverse

directions. The air vents are fixed and

cannot be adjusted manually.
Turn the adjuster wheel to

position 

;

.

9

Warning

Do not attach any objects to the

slats of the air vents. Risk of

damage and injury in case of an

accident.

Fixed air vents

Additional air vents are located

beneath the windscreen and door

windows and in the foot wells.

Maintenance

Air intake

The air intake in front of the

windscreen in the engine

compartment must be kept clear to

allow air intake. Remove any leaves,

dirt or snow.

Pollen filter

The pollen filter cleans dust, soot,

pollen and spores from the air

entering the vehicle through the air

intake.

Summary of Contents for 2011 Astra
















































































































































































































































Reviews:

No comments

Related manuals for 2011 Astra

Lange Originals HOIST-A-TOP JL CRANK Installation Instructions Manual preview
HOIST-A-TOP JL CRANK
Brand: Lange Originals Pages: 13
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Alpine eX-10 Installation Manual preview
eX-10
Brand: Alpine Pages: 8
BESAFE iZi Flex Manual preview
iZi Flex
Brand: BESAFE Pages: 4
Renault ALASKAN 2017 Driver'S Handbook Manual preview
ALASKAN 2017
Brand: Renault Pages: 340
Skoda Fabia Combi 5J Fitting Instructions preview
Fabia Combi 5J
Brand: Skoda Pages: 2
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
National Cycle Quantum Wash'n'Wipe N30205 Assembly Instructions And Owner'S Manual preview
Quantum Wash'n'Wipe N30205
Brand: National Cycle Pages: 12
Kuda 050130 Installation Instruction preview
050130
Brand: Kuda Pages: 4
Subaru Forester 2.5X 2003 Technicians Reference Booklet preview
Forester 2.5X 2003
Brand: Subaru Pages: 44
Horizon Global IREESE TACTICAL 70894 Instruction Manual preview
IREESE TACTICAL 70894
Brand: Horizon Global Pages: 3
walser Proguard 100021 User Instructions preview
Proguard 100021
Brand: walser Pages: 12
ACV 381094-36-1 Install Manual preview
381094-36-1
Brand: ACV Pages: 12
Volkswagen Transporter T5 Manuallines preview
Transporter T5
Brand: Volkswagen Pages: 83
Toyota PT427-89060 Manual preview
PT427-89060
Brand: Toyota Pages: 5
Crux SWRHN-62L Quick Manual preview
SWRHN-62L
Brand: Crux Pages: 2
Mazda 0000-8G-N03 Installation Instructions preview
0000-8G-N03
Brand: Mazda Pages: 4

Brands by name

Popular brands

Load more brands