User Manual Frequency Inverter Vector Basic
MSF – Vathauer Antriebstechnik GmbH & Co KG
Tel: +49 (0) 5231 – 63030
Am Hessentuch 6-8
Fax: +49 (0) 5231-66856
32758 Detmold
Email:
Web: www.msf-technik.de
7 / 25
1.8. Safety and Installation considerations
Frequency inverters from MSF-Technik are operating resources for the deployment in
industrial high-voltage plants and are operated with voltages that may cause heavy injuries
or death when touching!
•
Installations and works may only be executed by qualified electrical trained personnel
and at voltage free device. The user manual has to be available at any time and has
to be consequently regarded.
•
The local directives for building electrical plants and accident prevention regulations
must be fulfilled.
The device is up to 5 minutes after disconnecting from the voltage conducted with
dangerous voltage. Due to this, opening of the device or removing the cover res. the
I/O module and the display device is only permitted 5 minutes after disconnecting the
device from voltage. Before turning the mains voltage on all covers must be mounted
again.
•
Also at motor standstill (e.g. due to electronics lock, short circuit at the output clamps
or blocked drive) the voltage circuit clamps, motor clamps and clamps for the brake
resistance may conduct dangerous voltage. A motor standstill is not identical with
a galvanic disconnection from the mains voltage.
•
Attention: The inverter may, depending on the settings, start automatically after
powering the mains voltage.
Attention! Danger to Life!
The power supply conducts voltage under certain circumstances for up to 5 minutes after
turning off the mains voltage. Inverter clamps, drive cables and drive clamps may conduct
voltage!
Touching open or free clamps, cables and device parts may cause heavy injuries or death!
Attention
•
Children and the public must not have access to the device!
•
The device may only be used for the purpose intended by the manufacturer.
Unauthorized changes and the use of replacement parts and additional devices that
are not sold or approved by the manufacturer may cause fire, electric shocks and
injuries.
•
Keep the manual in reach and make it available for every user!
European EMC directive
If the vector field power is installed according to the recommendations of this manual it fulfills
the requirements of the EMC directive according to the EMC product norm for motor driven
systems EN 61800-3
2. Assembly and Installation
