User Manual Frequency Inverter Vector Basic
MSF – Vathauer Antriebstechnik GmbH & Co KG
Tel: +49 (0) 5231 – 63030
Am Hessentuch 6-8
Fax: +49 (0) 5231-66856
32758 Detmold
Email:
Web: www.msf-technik.de
5 / 25
1. Safety and application instructions for VECTOR basic
1.1. General
As long as any electrical equipment and machinery is switched on, the operator may touch voltage
leading and non-isolated conductors or rotating parts as well as hot surfaces.
At removing the covers and the prescribed protections, in handling the machine improperly, or during
service work or improper use, there is the danger of death or severe injuries or material damage.
All works with transport, installation and commissioning as well as maintenance have to be done by
properly trained personnel (regard IEC 364 res. CENELEC HD 384 or DIN VDE 0100 and IEC report
664 or DIN VDE 0110 and national accident prevention regulations or VGB 4).
Qualified personnel in terms of these basic security considerations are persons that are used to
installation; assembly, commissioning and operation of the product and that have qualifications
according to their work (defined in IEC 364 or DIN VDE 0105).
1.2. Intended Usage
Frequency inverters are components for installation within machines that are operated in industrial
plants.
The commissioning of the frequency inverter is prohibited until it is ascertained that the machine that
includes the frequency inverters follows the restrictions of the EU directive 2006/42/EG (machine
directive).
The frequency inverters match the protection goals of the low voltage directive 72006/95/EG and the
harmonized norms of the series EN 50178/ DIN VDE 0160 in connection with EN 60439-1/ DIN VDE
0660 part 500 and EN 601146/ DIN VDE 0558.
The operation is only permitted according to the EMC directive (04/108/EG).
The technical data and information to connection conditions are to be found at the rating plate or the
documentation and have to be completely fulfilled.
1.3. Transport and Storage
The considerations for transport, storage and the appropriate handling must be regarded.
Damages recognized after delivery must be immediately announced to the transport company. If
applicable, notify the distributor before commissioning.
Regard the environmental conditions according to prEN 50178.
