Vatech Green X, Installation Manual

Page: 148 / 164

Appendix
A-4 Green X / X18 (Model: PHT-75CHS) Installation Manual
B. Installing the Emergency Stop Switch
When installing the emergency stop switch, please check the following:

Install the emergency stop switch on the power cable line.

Install the switch in a location where the user can easily access in an
emergency but cannot push it by mistake.

The switch must be a mistake-proof type.

The switch is not supplied.

The switch must be installed at the height of 1.2 to 1.5 M(47 to 60”).

The cable sizes must be: N, L, and PE
≥
12 AWG (3 x 4 mm2).

The switch’s cable must be the same size as the power cable.

Install the socket connector terminal for the 2
nd
protective ground wire.