14
Värmebaronen EP 350
Information menu
RUNTIME 0h
PEAK BOILERTEMP XX°C
PEAK PCB-TEMP XX°C
ACTUAL PEC
000
PEAK PEC
000
ACTUAL CURRENT 0.00A
--------------------
Į- MENU SELECTOR
RUNTIME
0h
The time in hours for which the electronics were powered.
PEAK BOILERTEMP XX°C
The highest boiler temperature since the electronics were
last switched on.
PEAK PCB-TEMP XX°C
The highest temperature of the relay circuit board since the
electronics were last switched on.
ACTUAL PEC
000
PEAK PEC
000
Result of leakage current measurement The value, 1-500,
is a quality factor, i.e. the lower the value the better.
ACTUAL CURRENT 0.00A
Requires that the load guard current transformer is installed.
During direct supply the current of the highest load phase is
shown.
During secondary measurement, the current measured by
the secondary current transformer, 1-5 A, is displayed.
The actual current value is obtained by multiplying the read
off value by the primary transformer’s conversion ratio.
