Page 5
1. GENERAL
This document provides you with the necessary
information to install and operate the CPS-3M. The
document is presented as follows:
•
Introduction
•
Installation
•
User’s Guide
•
Appendix
Congratulations on your purchase of a CPS-3M natural
ventilation system. With options such as motor activated
curtains and integrated heating units, this product is
designed to provide optimal temperature control in
ventilated buildings.
The CPS-3M controls natural ventilation, either
simultaneously on both sides with a single actuator, or
independantly on both sides with 2 actuators. Those
options can be selected from a dip switch, located behind
the electronic card, inside the faceplate.
Moreover, the CPS-3M is equiped with state of the art logic
for extra-accurate ventilation and heating control.
The present manual has been published in order to make
custom installation and control easier. Initially, the CPS-3M
was designed for 3-wire actuators. If, however, four-wire
actuators are used, external relays will have to be installed
according to the wiring diagram (fig. 5) on page 14. Before
choosing any type of relay, make sure to consult the
specifications table (p. 41) of this manual. It contains the
minimum load information for CPS-3M’s relays.
CHAPTER 1 - INTRODUCTION
www.monitrol.com
