Page 16
CPS-3M
•
4 Zone 2 record high temperature
•
5 Zone 2 record low temperature
•
6 Heating set point
•
7 Heating differential
•
8 Zone 1 record low temperature
•
9 Zone 1 record high temperature
•
10 Zone 1 actuator max. run time
•
11 Zone 1 temperature main set point
•
12 Zone 1 room temperature display
Any one of these primary functions is selected by rotating the
selector dial to the corresponding number and associated
graphic image on the faceplate. When a primary functions is
selected, the window displays a blinking value. Function 12
displays room temperature in zone 1 and function 1 displays
room temperature in zone 2.
The 8 secondary functions are:
•
2 Zone 2 differential
•
3 Zone 2 delay (actuator 2)
•
4 Zone 2 high temperature realtive alarm
•
5 Zone 2 low temperature relative alarm
•
8 Zone 1 low temperature relative alarm
•
9 Zone 1 high temperature relative alarm
•
10 Zone 1 delay (actuator 1)
•
11 Zone 1 differential
Select any one of these secondary functions by:
•
rotating the selector dial to position (12)
•
rapidly rotating the adjustor dial back and forth to enter
secondary mode.
•
rotating the selector dial from function (12) to any other
secondary function.
When secondary functions (2) through (11) are selected, the
status window displays a blinking value along with a scrolling
LED display. Selection of function (12) switches the CPS-3M
back to primary mode.
www.monitrol.com
