Page 23
HEAT DIFFERENTIAL
The heating differential represent the
temperature to reach before turning the heating
device off. Heating starts at the temperature
initialized by function (6) of the primary mode,
and stops when the temperature goes over the
heating differential.
The differential is adjusted in 0.5 degree
increments from a minimum setting on 0.0°F
(0.0°C) to maximum setting of 6.0°F (3.0°C).
This prevents the heating device to start and
stop too frequently.
Adjusting the heating differential:
•
rotate the selector dial to position (7),
•
rotate the adjustor dial counterclockwise to
decrease the differential, and clockwise to
increase it.
The differential is displayed on the CPS-3M.
CHAPTER 3 - USER’S GUIDE
www.monitrol.com
