990 CLD Autoline™ Leak Detector
DRAFT 2/2/04
2-1
Section 2. Customer Integration
This section contains instructions for unpacking, inspecting, and installing the Vacuum
Technologies 990 CLD leak detector. Also included are instructions for setting up the leak
detector prior to actual operation.
The rack-mounted 990 CLD leak detector is intended for applications in which the leak
detector components are permanently mounted. Once the instrument is installed and
connected by manifold to a mechanical pump, it is expected that it will remain fixed at
that location for an extended period.
Unpacking
The leak detector is shipped in a heavy duty carton with fitted styrofoam cushions for
maximum shock protection. One carton contains the spectrometer tube already mounted to
the high vacuum pump, the second contains the console assembly and cables, instruction
manual, and accessories. Separate the cushions and save them with the carton if it is likely
that the leak detector will be transported. Various articles of the vacuum system are shipped
with protective covers of various types that must be removed prior to installation.
Inspection
Factory packing provides maximum protection during shipment. However, the leak detector
and related items should be inspected immediatey after being removed from the packing
carton(s). Any damage should be reported to the carrier without delay.
Be sure that you have received every item ordered.
Storing the Leak Detector
If the leak detector is not used immediately, store it as received without special precautions.
A non-condensing, dust-free area is preferred.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
