990 CLD Autoline™ Leak Detector
1-6
DRAFT 2/2/04
Physical Description
The physical components of the 990 CLD leak detector include:
❑
“Controls and Indicators”
❑
“Internal Components” on page 1-13
Controls and Indicators
The spectrometer tube and high vacuum pump are mounted together on a bracket with
proper couplings to simplify customer mounting and are connected to the main electronics
console by electrical cables. The spectrometer tube/high vacuum pump can then be
connected via vacuum tubing to a mechanical pump of the customer's choice. For
convenience, the primary and secondary operating controls and indicators are mounted on
the console front panel. The secondary controls are part of the main electronics assembly
and are located behind a lockable front panel door.
There are two sections to the front panel and one on the back panel:
❑
“Primary Controls”
❑
“Secondary Controls” on page 1-8
❑
“Rear Panel Inputs and Outputs” on page 1-10
Primary Controls
Figure 1-3
Primary Operating Controls and Indicators, 990 CLD Leak Detector
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
