11A
Signify Classified - Internal
4. Remove the spring at C with an appropriate tool like tweezers (the gobo is fixed with glass glue,
do remove it with some good glass cleaning fluid before removing the spring to avoid damage to
the gobo).
5. Do not touch the surface of the gobo with bare fingers. Put the gobo and the spring back into
the gobo holder (the gobo has a small position point at its edge which has to aim at the position
point on the gobo holder like D shows; the gobo coating side should face upwards), and then
apply a little glass glue to fix the gobo.
6. Insert the gobo holder back into the static gobo wheel assembly. After installation, put the
gobo & color assembly back to the fixture.
