30A
Signify Classified - Internal
Crossload (Software)
To select Crossload (Software), press the ENTER button to confirm, Send will show on the
display, press the ENTER button to store. Press the MENU button back to exit.
Service
To select Service, press the ENTER button to confirm. Use the UP/DOWN button to select
Service Settings, USB or Diagnostics, press the ENTER button to store. Press the MENU button
back to exit.
Service Settings
To select Service Settings, press the ENTER button to go into Password Access Only, press the
ENTER button to set the password 2606 and confirm. Use the UP/DOWN button to select Set
Position Cal, Color Offset, Gobo Offset, Optics Offset or Beam Offset, press the ENTER button
to store. Press the MENU button back to exit.
Set Position Cal
To select Set Position Cal, press the ENTER button to confirm. Use the UP/DOWN button to
select Pan, Tilt, Re. Pos. Offset or ReCal Position, then use the UP/DOWN button to adjust the
value for Pan or Tilt, press the ENTER button to store, the fixture will run as the channel value
indicates and to select No or Yes for Re. Pos. Offset or ReCal Position, press the ENTER button
to store. Press the MENU button back to exit.
Color Offset
To select Color Offset, press the ENTER button to confirm. Use the UP/DOWN button to select
Cyan, Yellow, Magenta, CTO, Color Wheel 1, Color Wheel 2, Reset Color Offset or ReCal Color,
then use the UP/DOWN button to adjust the value for Cyan, Yellow, Magenta, CTO, Color Wheel
1 or Color Wheel 2, press the ENTER button to store, the fixture will run as the channel value
indicates and to select No or Yes for Reset Color Offset or ReCal Color, press the ENTER button
to store. Press the MENU button back to exit.
Gobo Offset
To select Gobo Offset, press the ENTER button to confirm. Use the UP/DOWN button to select
