16A
Signify Classified - Internal
6. How To Set The Fixture
6.1 Control Panel
1. Display: To show the menu and the selected functions
2. Button:
MENU
To select the programming functions
UP
To go backward in the selected functions
DOWN
To go forward in the selected functions
ENTER
To confirm the selected functions
3. POWER INPUT: Used to connect to supply power
4. DMX/RDM THRU:
Connectors for DMX512 operation, use 5-pin XLR cable to link the next unit
5. DMX/RDM INPUT:
Connectors for DMX512 operation, use 5-pin XLR cable to link the DMX console
6. FIRMWARE UPGRADE: Used to upgrade fixture’s firmware
7. ETHERNET: Transfers fixture’s information to a main controller
8. BATTERY DISPLAY
6.2 Main Functions
To select any functions, press the MENU button until the required one is shown on the display.
Select the function by the ENTER button and the display will blink. Use the DOWN and UP button
to change the mode. Once the required mode has been selected, press the ENTER button to
setup. Back to the functions without any change press the MENU button. The main functions are
shown below:
