28A
Signify Classified - Internal
To select Follow Spot Mode, press the ENTER button to confirm. Use the UP/DOWN button to
select Enable or Disable, press the ENTER button to store. Press the MENU button back to exit.
Reset Defaults
To select Reset Defaults, press the ENTER button to confirm, Are You Sure? will show on the
display, press the ENTER button to store. Press the MENU button back to exit.
DMX
To select DMX, press the ENTER button to confirm, use the UP/DOWN button to select Address,
DMX Mode, Data, Pan/Tilt, Select Signal, Wireless DMX, Set Artnet or DMX
Fail.
Address
To select Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the
address from 001 to 512, press the ENTER button to store. Press the MENU button back to exit.
DMX Mode
To select DMX Mode, press the ENTER button to confirm. Use the UP/DOWN button to select
16-Bit Enh or 16-Bit, press the ENTER button to store. Press the MENU button back to exit.
Data
To select Data, press the ENTER button to confirm. Use the UP/DOWN button to select
Ch1-Intensity, Ch2-Intensity Fine or ….All functions, press the ENTER button to store. Press the
MENU button back to exit.
Pan/Tilt
To select Pan/Tilt, press the ENTER button to confirm. Use the UP/DOWN button to select Swap
Pan/Tilt, Invert Pan or Invert Tilt, press the ENTER button to store. Use the UP/DOWN button to
select Off or On, press the ENTER button to store. Press the MENU button back to exit.
Select Signal
To select Select Signal, press the ENTER button to confirm. Use the UP/DOWN button to select
DMX Only, Art-Net or Wireless DMX, press the ENTER button to store. Press the MENU button
back to exit.
