VANLEIGH PINECREST, Owner'S Manual

Page: 117 / 158

1 1 7
• It is possible to extend or retract the slideout beyond the maximum open or closed positions. This can result in
damage to the slide components, slide room structure or trim components.
• Important: The actuator is manual ready.
DO NOT disengage the motor. Just hook up and crank.
Maintenance
Although the system is designed to be almost maintenance free, actuate the room once or twice a month to keep
the seals and internal moving parts lubricated. Check for any visible signs or external damage before and after
movement of the RV.
• For the best performance, the slideout system requires the auxiliary battery be fully charged.
• Check for corrosion, and loose or damaged terminals/ connections at the battery, the control switch, and the
electronic actuator motor.
• Check that the motor leads under the RV chassis are in good condition. These connections are subject to dam-
age from road debris.
• When operating the Lippert electric slideout system in harsh environments (i.e., road salt, ice buildup, etc.) keep
all moving parts clean, washing them as needed, with mild soap and water.
• Grease or lubrication is NOT necessary. It could even harm the long-term dependability of the slideout system.
Service and adjustments
Any slideout room adjustments must be performed by a certified RV service technician. Adjustments made by
non-certified persons may void any and all warranty claims.
S C H W I N T E K I N - WA L L S L I D E O U T S Y S T E M
If the bedroom IN-WALL slideout does not extend
or retract, follow these steps to override the system
(it will be easier if you have one or more persons to
assist you):
Typical IN-WALL slide controller, located in the
front facing compartment of your FW.
S L I D E O U T S Y S T E M S