REV 3
EZCT S2 USER’S MANUAL
43
3.4.7. Unloading a Test Plan from the Working Memory
To unload the test plan from the working memory and clear all the test plan parameters:
a.
Start from the “START-UP” menu:
Press the
[3]
key (
TEST PLANS
).
b.
The following screen will be displayed:
Press the
[2]
key (
UNLOAD TEST PLAN
).
c.
The following screen will be displayed:
Press any key to return to the “START-UP” menu.
TEST PLAN UNLOADED!
1.
LOAD TEST PLAN
2.
UNLOAD TEST PLAN
3.
PLAN DIRECTORY
4.
NEXT PAGE
1.
RUN TEST 12/04/09
2.
SETUP 10:25:35
3.
TEST PLANS
4.
DIAGNOSTIC
Summary of Contents for EZCT S2
Page 23: ...REV 3 EZCT S2 USER S MANUAL 19 Figure 5 Typical EZCT S2 Tabulated Report Printout...
Page 25: ...REV 3 EZCT S2 USER S MANUAL 21 Figure 6 Typical EZCT S2 Graphic Report Knee Point Marker...
Page 31: ...REV 3 EZCT S2 USER S MANUAL 27 Figure 7 Typical Internal Test Record Directory Printout...
