![Vanguard Instruments EZCT S2 User Manual Download Page 26](http://html1.mh-extra.com/html/vanguard-instruments/ezct-s2/ezct-s2_user-manual_3388302026.webp)
EZCT S2 USER’S MANUAL
REV 3
22
3.3
Working With Test Records
3.3.1. Restoring and Printing a Test Record From Flash EEPROM
You can restore a test record from the EZCT S2’s Flash EEPROM to the working memory. You
can then print the restored test record on the unit’s built-in thermal printer. To restore a test
record:
a.
Start from the “START-UP” menu:
Press the
[2]
key (
SETUP
).
b.
The following screen will be displayed:
Press the
[3]
key (
RESTORE RECORD
).
c.
The following screen will be displayed:
1.
ENTER RECORD NUMBER
If you know the record number that you would like to restore, press the
[1]
key.
The following screen will be displayed:
Type the record number using the alpha-numeric keypad and then press the
[ENTER]
key. The following screen will be displayed:
RECORD RESTORED!
PRINT RECORD?
1.
YES
2.
NO
RESTORE RECORD
NUMBER:
RESTORE RECORD
1.
ENTER RECORD NUMBER
2.
SCROLL TO SELECT
1.
RECORD ID
2.
PRINT RECORD
3.
RESTORE RECORD
4.
NEXT PAGE
1.
RUN TEST 12/01/09
2.
SETUP 14:52:19
3.
TEST PLANS
4.
DIAGNOSTIC
Summary of Contents for EZCT S2
Page 23: ...REV 3 EZCT S2 USER S MANUAL 19 Figure 5 Typical EZCT S2 Tabulated Report Printout...
Page 25: ...REV 3 EZCT S2 USER S MANUAL 21 Figure 6 Typical EZCT S2 Graphic Report Knee Point Marker...
Page 31: ...REV 3 EZCT S2 USER S MANUAL 27 Figure 7 Typical Internal Test Record Directory Printout...