REV 3
EZCT S2 USER’S MANUAL
7
2.0 PRE-TEST
SETUP
2.1 Operating
Voltages
The EZCT S2’s operating voltage is preset at the factory for 100-120 Vac, 50/60 Hz or 200-240
Vac, 50/60 Hz.
2.2
LCD Screen Contrast Control
To increase the LCD screen contrast, press and hold the
[PAPER
∧
Contrast]
key for two
seconds. Release the button when the desired contrast level has been reached.
To decrease the LCD screen contrast, press and hold the
[PAPER
∨
Contrast]
key for two
seconds. Release the button when the desired contrast level has been reached.
2.3
Printer Paper Control
To advance the thermal printer paper, press and release the
[PAPER
∧
Contrast]
key.
To retract the thermal printer paper, press and release the
[PAPER
∨
Contrast]
key.
2.4 Printer
Paper
The EZCT S2’s built-in thermal printer
uses 4.5-inch wide thermal paper for printing test results.
To maintain the highest print quality and to avoid paper jams, the use of thermal paper
supplied by Vanguard Instruments Company is highly recommended. Additional paper can be
ordered from the following sources:
Vanguard Instruments Co, Inc.
1520 S. Hellman Avenue
Ontario, CA 91761
Tel: 909-923-9390
Fax: 909-923-9391
Part Number: VIC TP-4 paper
BG Instrument Co.
13607 E. Trent Avenue
Spokane, WA 99216
Tel: 509-893-9881
Fax: 509-893-9803
Part Number: VIC TP-4 paper
Summary of Contents for EZCT S2
Page 23: ...REV 3 EZCT S2 USER S MANUAL 19 Figure 5 Typical EZCT S2 Tabulated Report Printout...
Page 25: ...REV 3 EZCT S2 USER S MANUAL 21 Figure 6 Typical EZCT S2 Graphic Report Knee Point Marker...
Page 31: ...REV 3 EZCT S2 USER S MANUAL 27 Figure 7 Typical Internal Test Record Directory Printout...
