EZCT S2 USER’S MANUAL
REV 3
40
When the test has finished, the following screen will be displayed:
Press the
[1]
key (
YES
) to save the record.
The following screen will be displayed momentarily:
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
3.
UNLOAD TEST PLAN
Press the
[3]
key to unload the test plan and run a test without a test plan. This
will unload the test plan from the working memory and bring up the standard
“RUN TEST” menu. Please see section 3.2.2, step b.
c.
The following screen will be displayed:
Press the
[ENTER]
key.
d.
The following screen will be displayed:
Use the alpha-numeric keys on the keypad to enter a test note and press the
[ENTER]
key.
e.
The following confirmation screen will be displayed showing the test parameters:
HOOK CABLES TO CT:
X1 CABLE to CT-X1
X2 CABLE to CT-X2
“ENTER” TO CONTINUE
ENTER TEST 1 NOTE:
↑
/
↓
TO POSITION
“ENTER” TO ACCEPT
RECORD NUMBER 2
HAS BEEN SAVED!
SAVING RECORD...
PLEASE WAIT...
SAVE THIS RECORD?
1.YES
2.NO
Summary of Contents for EZCT S2
Page 23: ...REV 3 EZCT S2 USER S MANUAL 19 Figure 5 Typical EZCT S2 Tabulated Report Printout...
Page 25: ...REV 3 EZCT S2 USER S MANUAL 21 Figure 6 Typical EZCT S2 Graphic Report Knee Point Marker...
Page 31: ...REV 3 EZCT S2 USER S MANUAL 27 Figure 7 Typical Internal Test Record Directory Printout...
