EZCT S2 USER’S MANUAL
REV 3
32
3.4.2. Printing a Directory of Test Plans Stored in the EZCT S2’s Memory
You can print a directory of all the test plans stored in the EZCT S2’s Flash EEPROM using the
steps below:
a.
Start from the “START-UP” menu:
Press the
[3]
key (
TEST PLANS
).
b.
The following screen will be displayed:
Press the
[3]
key (
PLAN DIRECTORY
).
c.
The following screen will be displayed while the test plan directory is printed on the
thermal printer:
You will be automatically returned to the “START-UP” menu after the directory printing
is finished. A typical Flash EEPROM test plan directory printout is shown in Figure 8.
PRINTING DIRECTORY
1.
LOAD TEST PLAN
2.
UNLOAD TEST PLAN
3.
PLAN DIRECTORY
4.
NEXT PAGE
1.
RUN TEST 12/04/09
2.
SETUP 08:39:17
3.
TEST PLANS
4.
DIAGNOSTIC
Summary of Contents for EZCT S2
Page 23: ...REV 3 EZCT S2 USER S MANUAL 19 Figure 5 Typical EZCT S2 Tabulated Report Printout...
Page 25: ...REV 3 EZCT S2 USER S MANUAL 21 Figure 6 Typical EZCT S2 Graphic Report Knee Point Marker...
Page 31: ...REV 3 EZCT S2 USER S MANUAL 27 Figure 7 Typical Internal Test Record Directory Printout...
