V&T V5 Series User Manual Download Page 2

Page: 2 / 52

Foreword

ShenZhen V&T Technologies Co.,Ltd. was certificated as a "National

Hi-tech and Double-Software Enterprise" engaged in Variable Frequency Drive,

Servo Drive, Electric Vehicle Controller, Inverter and other power electronics

product

with

independent

intellectual

property

rights

covering

R&D,manufacturing, marketing, with the profound drive know-how, we has won

the technical innovation prize,the most competitive brands prize, Champions of

National Hybrid Electric Vehicle competition and one of Top Ten Variable

Frequency Drive Enterprises in China and etc.

ShenZhen V&T Technologies Co.,Ltd. has advanced asynchronous vector

control technology and torque control technology which is the core control

technologies in motor drive section, Through continuous technological

innovation and international technical

exchange, V&T developed core technology with most experienced R&D

team in China and completed industrial design and production capacity, Has a

rich standard product line, a variety of industry special machine series, voltage

level from 220V to 1140V and power rating from 0.4KW to 3MW; can meet many

kinds of applications.

V&T crane special inverter adopts high performance torque vector control

technology. It has excellent torque control,reliable brake control timing, speed

monitoring, torque monitoring, power optimization, location processing,

intelligent deceleration functions, fully guarantee the safety, efficiency and

reliability. It be widely used in port, ships , marine engineering, mining,

construction, metallurgy,factories and other industries crane machinery.

According to the different characteristics of the lifting industry, V&T has launched

a variety of lifting products to meet different application needs.

The V6-GH inverter is suitable for hoisting mechanisms with encoder

feedback.

Summary of Contents for V5 Series





















































Search results

Summary of Contents for V5 Series

Reviews:

Related manuals for V5 Series

Brands by name

Popular brands

V&T V5 Series, User Manual

Search results

Summary of Contents for V5 Series

Reviews:

Related manuals for V5 Series

Brands by name

Popular brands