This enforced password change is best practise to ensure the service stays
secure. If you lose your password, perform a factory reset of the unit (see
on page 26). Note that resetting the unit will remove any settings, cameras
and previous recordings.
Once the password is successfully changed, you may continue with the setup of ACT365-VCU.
5.2 Adding Cameras using Discovery
To add a camera using discovery, log in to the ACT365-VCU web interface (see
on the previous page), then:
1. Click the
Cameras
tab.
Automatically discovered cameras are listed in the
Discovered Cameras
section.
2. Select a camera in the
Discovered Cameras
list, then click
Add
.
The
Probe Device
dialog box displays.
ACT365-VCU / ACT365-VCU2A / ACT365-VCUPoE – Installation and Operating Instructions
Configuring ACT365-VCU
© Vanderbilt 2019
18
A-100528-b
20.05.2019
