AIR N ARC
®
150 SERIES
SECTION 4: OPERATION
090051-OP_r0 (FEB-2014)
PAGE - 17
Vanair Manufacturing, Inc.
vanair.com • 800-526-8817
4.1 GENERAL INFORMATION
Consult
Figure 4-1
. The Air N Arc 150
Series machine has a comprehensive array
of controls and indicators for each function of
the machine system. Understanding the
correct operation of the Air N Arc 150 Series
system will help you to understand and
recognize when the system is operating
optimally. The information in the Operation
Section will help the operator to recognize
and interpret the readings, which will call for
service or indicate the beginning of a
malfunction.
4.2 ENGINE START-UP AND
SHUTDOWN PROCEDURE
Consult
Figure 4-2
for operating procedures
detailed in this section.
NOTE
Before starting the Air N Arc 150 Series
machine, read this section thoroughly
and familiarize yourself with the controls
and indicators - their purpose, location
and use.
DANGER
Grounding must consist of a minimum 4
gauge wire between the instrument
panel, the machine, and the truck
chassis.
WARNING
Follow all applicable safety
recommendations as outlined in
Section
1: Safety
of this manual.
WARNING
Before performing maintenance or repair
operations on the machine, disconnect
battery and relieve air pressure.
NOTE
If start-up and shut-down procedures are
not followed, damage to the system and
its components may occur.
NOTE
If the generator switches are set to ON
prior to starting, and/or the pressure in
the air tank is less than 10 psi, the
machine will start at full speed.
All machine package maximum
operation angles of tilt are fifteen
degrees (15°).
SECTION 4:
OPERATION
