9
3.
Gas Detector:
How to install:
We recommend to set the gas detector in your kitchen or corridors, this sensor will
send an alarm notification in case of a gas leakage so you and your family can
evacuate the area before deadly gases get in to any bedroom.
You can link maximum 4 Gas Detectors to the system. The zone number for the Gas Detector is “03”.
Each zone supports up to 4 sensors; in case you want to link more than 4 Gas Detectors you can use
the zone number: “05”, “06”, 07”, “08” and “09”.
Note:
You will need a lighter (the one used to light a cigarette) in order to trigger the Gas Detector
during the programming procedure.
Please follow the next steps to link the sensor to the system:
1.
Press: “
ENT
”.
2.
Enter Code: “
888888
” (this is the default password).
3.
Select: “
Program Sensor
” use the arrows
to find the option in the menu.
4.
Press: “
ENT
”.
5.
Delete the old record by pressing the arrow
.
6.
Enter “
Zone Number
”: 03
7.
Press: “
ENT
”.
8.
Enter “
Group Number.”:
Delete the old record by pressing the arrow
.
9.
Enter “0” for the first Gas Detector, “1” for the second Gas Detector, “2” for the Gas
Detector and “3” for the fourth Gas Detector.
10.
Press “
ENT
”.
11.
Choose “
ActivateSensor
” and press: “
ENT
”.
12.
When appears: “
Learning
”, Trigger the Gas Detector two times by letting escape gas from
the lighter very close to de device during two seconds twice.
13.
It will appear on the screen: “
Success
” in case of “
Failure
” please repeat the process one
more time.
14.
Done!
