ValueStore US WS-360, User Manual

Page: 28 / 30

28
11. Smart Zone:
When this feature is enabled you cannot “ Arm Home ” or “ Arm Away ” if a door or window
under the Smart Zone is open; it is possible to arm the system if all Entry Sensors are closed;
in addition you can also enable the “
Zone Indicator ” feature that will notify you when a
door or window has been opened by emitting a sound (“ bi ”) from the main panel.
NOTE: please be advised that this feature works only for Entry Sensors.
Please follow the steps to enable the “ Smart Zone ” in a “ Zone Number ”:
1. Press: “ SET ”.
2. Enter Code: “ 888888 ” (this is the default password).
3. Select: “ Set Smart Zone” use the arrows

to find the option in the menu.
4. Press: “ ENT ”.
5. Delete the old record by pressing the arrow

.
6. Enter: Zone Number you wish to enable “ XX ”.
7. Smart Sensor ON? Select: “ YES ” use the arrows

to choose “ ON ”.
8. Press: “ ENT ”.
9. Door Status: OP (OPENED) or CL (CLOSED), choose: CL (closed) if the Entry Sensor and
magnet are together or if the door/ window is closed, otherwise choose OP (opened).
10. Press: “ ENT ”.
11. “ Zone Indicator ” choose: “ NO ” if you do not wish that the main panel emit a sound (“ bi ”)
when a door/ window under this Zone Number has been opened; if you wish that the main
panel emit a sound (“
bi ”) when a door/ window has been opened then choose: “ YES ”.
12. Press: “ ENT ”.
13. If you wish to enable the Smart Zone feature for another Zone Number please follow again
from Step 5 to 11.
14. Done!