ValueStore US WS-360, User Manual

Page: 12 / 30

12
13. It will appear on the screen: “ Success ” in case of “ Failure ” please repeat the process one
more time.
14. Done!
6. Motion Detector (P.I.R):
How to install:
We recommend you to install the motion detectors on the top of any corner of the
rooms you want to protect.
Just turn on the device and stick it to the wall with a screwdriver.
You can link maximum 36 Motion Detectors to the system. The zone number for the Motion
Detector is “from 21 to 29”. Each zone supports up to 4 sensors and each zone has 4 “
Group
Number ”.
Example: I need to link 6 Motion Detectors to the alarm system, so the first Motion Detector will be
in the zone number “ 21 ” and group number “ 0 ”, the second Motion Detector will be in zone “ 21 ”
and group number “ 1 ”, the third Motion Detector will be in zone “ 21 ” and group number “ 2 ”, the
fourth Motion Detector will be in zone “ 21 ” and group number “ 3 ”, - now we change to zone
number “ 22 ” because each zone supports up to 4 sensors -, the fifth Motion Detector will be in zone
number ” 22 ” and group number “ 0 ” and the sixth Motion Detector will be in zone “ 22 ” and group
“ 1 ”.
Note: open the battery compartment and connect the battery before you follow the steps.
Please follow the next steps to link the sensor to the system:
1. Press: “ ENT ”.
2. Enter Code: “ 888888 ” (this is the default password).
3. Select: “ Program Sensor ” use the arrows

to find the option in the menu.
4. Press: “ ENT ”.
5. Delete the old record by pressing the arrow

.
6. Enter “ Zone Number ”: 21
7. Press: “ ENT ”.
8. Enter “ Group Number.”: Delete the old record by pressing the arrow

.
9. Enter “0” for the first Motion Detector, “1” for the second Motion Detector, “2” for the third
Motion Detector and “3” for the fourth Motion Detector.