ValueStore US WS-360, User Manual

Page: 21 / 30

21
1. Siren On/Off (Silence Alarm Mode):
This option is to enable or disable the Sirens; if you choose “ ON ” the sirens goes off if the alarm
system is triggered, if you choose “ OFF ” the Sirens will NOT go off if the alarm system is triggered by
a sensor but still you will receive a SMS notification informing you that the alarm system has been
triggered.
By default the Sirens are enabled (“ ON ”) and the default alarming time is 3 minutes (this means that
the Sirens will sound during 3 minutes). If you wish you can extend the alarming time to up to 60
minutes.
Please follow the next steps to disable the Sirens:
1. Press: “ SET ”.
2. Enter Code: “ 888888 ” (this is the default password).
3. Select: “ Siren On/Off ” use the arrows

to find the option in the menu.
4. Press: “ ENT ”.
5. Choose: “ OFF ” ” use the arrows

to choose “ OFF ”.
6. Press: “ ENT ”.
7. Exit the Menu by pressing the “ EXIT ” button located on the right side of the zero “ 0 ”.
8. Done!
Please follow the next steps to enable the Sirens:
1. Press: “ SET ”.
2. Enter Code: “ 888888 ” (this is the default password).
3. Select: “ Siren On/Off ” use the arrows  to find the option in the menu.
4. Press: “ ENT ”.
5. Choose: “ ON ” ” use the arrows

to choose “ ON ”.
6. Press: “ ENT ”.
7. Delete the old record by pressing the arrow

.
8. Input the alarming time in minutes (from 01 minutes to 60 minutes).
9. Press: “ ENT ”.
10. Done!