18
STEP 4:
How to Arm or Disarm the Alarm System?
“Arm Away” mode
：
Once any sensor in Perimeter Zone or Motion Zone get triggered; the
alarm system goes off.
“Arm Home” mode
：
Once any sensor in Perimeter Zone triggered; the alarm system goes off.
Sensors in the Motion Zone will not be able to trigger the system.
NOTE:
If any sensor in the Emergency Zone gets triggered, the alarm system goes off even if the
system is Disarm.
1.
From the Main Panel:
Please follow the next steps to arm the system from the panel:
1.
Press: Arm Button or “0”.
2.
Enter Code: “
888888
” (this is the default password).
3.
Select: “
Arm
Home
” or “
Arm Away
” use the arrows
to choose the Arm Mode.
4.
Press: “
ENT
”.
5.
Once you press “
ENT
” the alarm panel will start to sound “bi bi bi” for 15 seconds before the
Arm Mode is activated.
6.
Done!
Please follow the next steps to disarm the system from the panel:
1.
Press: the “
Escape Button
” (located on the right side of the zero “0”).
2.
Enter Code: “
888888
” (this is the default password).
3.
Press: “
ENT
”.
4.
Done!
