15
Please follow the next steps to link the Indoor Siren
using a Remote Control
:
1.
Connect the Siren to the Power Plug.
2.
Press: the small black button located on one side of the Siren to turn the device in learning
mode (all LED lights will turn to indicate that learning mode is activated).
3.
Activate the Alarm System from the Remote Control by pressing emergency button “ ”
then disarm the system from the remote control.
4.
If the Siren was successfully synchronized to the system, the LED’s from the Siren will flash
few times, if not please repeat the process.
5.
Done!
Please follow the next steps to link the Indoor Siren
from the Alarm Host
:
1.
Connect the Siren to the Power Plug.
2.
Press: the small black button located on one side of the Siren to turn the device in learning
mode (all LED lights will turn to indicate that learning mode is activated).
3.
Activate the Alarm System by pressing the Emergency Button located on the left side of the
number 0 (zero), once the alarm has been triggered, disarm the system by pressing the
Disarm Button located on the right side of the 0 (zero) then Enter Code: “888888” then press:
“ ENT”.
4.
If the Siren was successfully synchronized to the system, the LED’s from the Siren will flash
few times, if not please repeat the process.
5.
Done!
