10
4.
Smoke Detector:
How to install:
We recommend to set the smoke detector in the ceiling of your kitchen,
corridors or any room of your home, this sensor will send an alarm
notification in case of any detection of smoke, so you and your family can
react on time or evacuate the area before is too late.
You can link maximum 4 Smoke Detectors to the system. The zone number for the Smoke Detector is
“04”. Each zone supports up to 4 sensors; in case you want to link more than 4 Smoke Detectors you
can use the zone number: “05”, “06”, 07”, “08” and “09”.
Note:
open the Smoke Detector and connect the battery before you follow the steps.
Please follow the next steps to link the sensor to the system:
1.
Press: “
ENT
”.
2.
Enter Code: “
888888
” (this is the default password).
3.
Select: “
Program Sensor
” use the arrows
to find the option in the menu.
4.
Press: “
ENT
”.
5.
Delete the old record by pressing the arrow
.
6.
Enter “
Zone Number
”: 04
7.
Press: “
ENT
”.
8.
Enter “
Group Number.”:
Delete the old record by pressing the arrow
.
9.
Enter “0” for the first smoke detector, “1” for the second smoke detector, “2” for the smoke
detector and “3” for the fourth smoke detector.
10.
Press “
ENT
”.
11.
Choose “
ActivateSensor
” and press: “
ENT
”.
12.
When appears: “
Learning
”, Trigger the smoke detector two times by pressing the small black
button(for two seconds) in the front of the smoke detector.
13.
It will appear on the screen: “
Success
” in case of “
Failure
” please repeat the process one
more time.
14.
Done!
