VALTIR Vulcan Barrier System CEN, Assembly Manual

Page: 4 / 28

www.Valtir.com 3 Revision B December 2022
Customer Service Contacts
Valtir is committed to the highest level of customer service. Feedback regarding the
Vulcan
TM
Barrier System, its assembly procedures, Manual content, and in-field
performance is always welcome. Our goal is to assist highway authorities in making their
highways safer. Additional information can be obtained by calling the telephone numbers
below:
Valtir:
Telephone: +1 (214) 589-8140
Internet: http://www.Valtir.com/
Important Introductory Notes
Proper assembly of the Vulcan
TM
Barrier System is essential for the system to perform
as tested and accepted per EN 1317. These instructions should be read in their entirety
and understood BEFORE assembling the Vulcan
TM
Barrier. These instructions are to be
used only in conjunction with the assembly of the Vulcan
TM
Barrier System and are for
standard assemblies only as specified by the applicable highway authority. In the event
your system assembly requires or involves special circumstances or, during the
assembly process, a question arises regarding a particular assembly step, contact the
design engineer for the highway authority before proceeding. If you proceed with an
assembly that deviates from that specified and approved by the applicable highway
authority, you negate the system’s accepted performance standards.
A set of product and project shop drawings will be supplied by Valtir. The shop drawings
will be for each section of the assembly. These drawings should be reviewed and
studied thoroughly by a qualified individual who understands their content before the
start of any deployment.