VALTIR Vulcan Barrier System CEN, Assembly Manual

Page: 17 / 28

www.Valtir.com 16 Revision B December 2022
Alternative Anchoring Options
There are numerous manufacturers of anchors that provide a product that will
successfully anchor the Vulcan™ Barrier CEN System to the foundation. Valtir has
performed anchor performance tests on several of these alternative anchors. The
following list states which anchors have satisfactorily passed our minimum requirements
(i.e. min. pull out strength of 82.3kN [18,500lbs] and min. shear strength of 109kN
[24,500lbs]. Valtir makes no representations as to the performance of anchors that it has
not tested and is not listed herein.
Caution:
All anchors must be assembled strictly according to each anchor
manufacturer’s specific requirements. It is recommended that the anchor
manufacturer be consulted to discuss your specific assembly site conditions prior to
finalizing your anchor selection.
Concrete:
http://www.hilti.com
Models [Epoxy-based anchoring systems]:
HVU M20 x 170
HY 150
RE 500
Asphalt:
http://www.kelken.com
Model [Epoxy-based anchoring system]:
N/A Kelken "Lefty" anchor coated with Kelislip bond release agent and anchored with
Keligrout epoxy
•
Kelken “Lefty” anchors (3/4 inch diameter x 18 inch long)
•
3/4-10 threads at top 2 inches of anchor, 3/4 inch “Lefty” removable thread
for remaining anchor length (~16 inches)
•
Material per ASTM A449 Type 1 or ASTM A193 Grade B7 or SAE J429
Grade 5
•
Galvanized for corrosion resistance
•
Includes 3/4 inch galvanized washers and 3/4-10 galvanized nuts
• 1KS12Q (Kelislip bond release agent)
•
1KG101T (Keligrout epoxy)