VALTIR Vulcan Barrier System CEN, Assembly Manual

Page: 16 / 28

www.Valtir.com 15 Revision B December 2022
7. Push the stud down through
the part to be anchored and into
the hole. Leave enough of the
stud exposed to attach the nut
and washer. Twist the stud
several turns in the grout to wet
the threads.
8. Place a flat washer onto the
stud and thread a nut on until it
is flush with the top of the stud or
seated against the part. Do not
disturb or load the stud until the
material has hardened.
9. Once the grout has hardened,
torque the nut to recommended
values.
In compliance with the US Department of Labor Hazard Communication 1910.1200,
Material Safety Data Sheets are available upon request.
Valtir expressly disclaims any express or implied warranty of any kind in connection with
the use of the MP-3 Polyester Anchoring System.
Valtir expressly disclaims liability for injury to persons or damage to property resulting
from failure to follow instructions or improper application of the MP-3 Polyester
Anchoring System.
Valtir is committed to meeting our customer’s requirements and to supplying high quality,
safe products to the requesting highway authority for use on the nation’s highways. If
you have any questions, please contact our Customer Service Department at +1 (214)
589-8140.
Document No. 2735041-0000, Sheet 1/2 Revision B