42
Decorative Glass Murano 2200DGM
Material required
• Decorative Glass Murano kit, which contains:
• 1 bag of clear
fi
reglass
• 2-piece glass platform
• 8 ceramic pads
Installation
Carefully unpack the kit.
1. Install the 8 ceramic pads around the burner as indicat-
ed. The pads will raise the glass platform.
2. Install the front and rear glass platform, smooth side up, on the ceramic pads.
3. Carefully spread the
fi
reglass by hand on the surface of burner forming a single layer to the level of the top edge
of the
fl
ange around the burner.
Do not pour directly from the bag and do not pour too much to avoid blocking
the burner ports.
NOTE:
Ensure the areas
within
the pilot shield and pilot safe zone are clear of
fi
reglass.
Pilot shield
Pilot safe zone
IMPORTANT:
Approved for use only with the
fi
reglass
provided with your Valor
fi
replace The use of any
other
fi
reglass products may void your
fi
replace war-
ranty.
Decorative Glass Murano installed
Installation
WARNING
CHOKING HAZARD! Ensure that the
fireplace area is clear of fireglass particles
as these could be ingested by small
children. Vacuum area after installation.
Fuel Beds
