Valor LX2 2200KN, Installation Manual

Page: 65 / 90

65
Appendix B - Remote Control Operation
Child Proof
Your handset can be set to lock out all commands to the
ȴ replace, except OFF.
To turn Child Proof ON:
1. Press and hold + simultaneously.
2.
is displayed. Child Proof is now active.
To turn Child Proof OFF:
1. Press and hold + simultaneously.
2.
disappears. Child Proof is now inactive, and the
handset has full function.
Countdown Timer
You can set your ȴ replace to automatically turn o
΍
at
the end of a timer.
To set a Countdown Timer:
1. Press and hold until is displayed.
Hour ȵ ashes.
2. Press or to select Hour.
3. To con ȴ rm, press .
Minutes ȵ ash.
4. Press or to select Minutes.
5. To con ȴ rm, press or wait.
To turn off a Countdown Timer:
1. Press , and the countdown disappears.
Note: The Countdown Timer only works in Manual,
Thermostatic, and Eco modes. Maximum countdown
time is 9 hours and 50 minutes.
Light/Dimmer Operation
On:
Press , is displayed. Light is on at
preset level.
Off:
Press , disappears. Light turns o
΍
.
Setting:
1. Press and hold until ȵ ashes.
2. To adjust light between 20-100% press or .
3. To con
ȴ rm setting either press or wait.
is displayed.
Note: The light works independently of the pilot ȵ ame.
If you want the light on but no ȵ ame, press button.
Circulating Fan Operation
Setting:
1. Press and hold until ȵ ashes.
2. Press to increase or to de-
crease fan speed.
3. To con ȴ rm setting, either press
or wait. is displayed.
Off:
Press until all 4 speed level bars disappear.
Note: When setting, if the fan was not switched o
΍
after last use, it starts automatically 4 minutes after
ignition at maximum speed, and goes to the last set
level after 10 seconds. The fan stops 10 minutes after
the gas is OFF or at pilot.
AM