35
Glass retainer with a
deeper return
Brick retainer with a
shallower return
7. Slide the end panels towards the center to eliminate
any gaps between them.
8. Ensure all panels are square against the back wall of
the
fi
rebox.
9. Push the 3 panel supports against the top of each
section and tighten the screw.
10. Two brick retainers and three glass retainers are
supplied with the panels. They are used to hold the
bottom of the rear panels against the rear wall of
the
fi
rebox. The brick retainers have a shallower
return and the glass retainers have a deeper return.
11. Hook one retainer to the back of the
fi
rebox rear
wall and fold it over the lip on which sits the ceramic
panel so it holds the panel against the rear wall.
12. Repeat with the other panels.
13. Re-install the rear media tray (3 screws).
Installation
Liners
