Valmar EASY 3 TTi Handling, Operating And Maintenance Manual Download Page 29

Page: 29 / 78

7.2.2.2

UPLOAD OF NEW PROGRAM OR NEW SOFTWARE

The program is uploaded only when the machine is powered off before inserting
the USB key with new software version!

1. Make sure the machine is OFF before starting.

You can do this by pressing on/off switch (red
button). Then Insert the USB key with new
database and/or program.

2. Turn on the machine by putting the on/off in ON

position.

3. New software is uploaded automatically. At first

the machine start screen is displayed.

4. A pop up message appears. Confirm the update

by pressing OK button. Check if everything is
updated (info menu screen). If confirm pop up
message is not displayed during start, then
software update cannot proceed. Check USB
key on a computer.

8. The start with updated software is like first use of

new machine. Firstly the LANGUAGE
SELECTION screen appears. Select the desired
language.

5. Read the text and then press the confirm button

to confirm you understand disclaimer.

6. The HOME screen is displayed. The machine is

ready for use in the selected language.

Press the BACK button

to return to the previous screen. Press the HOME

button

to cancel the operation and return to the HOME screen.

Summary of Contents for EASY 3 TTi















































































Search results

Summary of Contents for EASY 3 TTi

Reviews:

Related manuals for EASY 3 TTi

Brands by name

Popular brands

Valmar EASY 3 TTi, Handling, Operating And Maintenance Manual

Search results

Summary of Contents for EASY 3 TTi

Reviews:

Related manuals for EASY 3 TTi

Brands by name

Popular brands