Valmar EASY 3 TTi, Handling, Operating And Maintenance Manual

Page: 66 / 78

66

Slide the cover lid on batch feeder.
12.3.1 SANITIZE THE PROCESSING CYLINDER BEFORE USE

Make sure that the mixture treating control panel is in STOP state.

Make sure that the outlet hole is well closed.

Pour approximately 4 inches (10 cm 1 gallon, 4 liters) of sanitizing
solution into the cylinder.

Close the batch feeder cover.

Press the MIXING key.

Let the machine operate for 10 seconds at the most! The appliance is
allowed to run without ice cream mixture for 10 seconds at the
most!

Press the STOP / RESET key.

Place a suitable container under the outlet opening and empty the
sanitizing solution out of the cylinder.
