Valmar EASY 3 TTi, Handling, Operating And Maintenance Manual

Page: 55 / 78

55
12.3.2 RINSE THE PROCESSING CYLINDER

Make sure that the mixture treating control panel is in STOP state.

Make sure that the outlet hole is well closed.

Slide out the batch feeder cover and pour approximately 4 inches (10 cm
1 gallon, 4 liters) of water into the cylinder.

close the batch feeder cover.

press the MIXING key.

Let the machine operate for 10 seconds at the most! The appliance is
allowed to run without ice cream mixture for 10 seconds at the
most!

Press the STOP / RESET key.

Place a suitable container under the outlet opening and empty the water
out of the cylinder.

If necessary, repeat procedure until no product residue is visible.
12.3.3 DISSASEMBLE, WASH AND RINSE THE PARTS

Remove the batch feeder cover by pulling it towards you.
Unscrew (in counter-clockwise direction) and remove the
LOCK NUT
.
Remove the outlet hole cover
