30
SETTINGS
USING THE UNIT
FILTER SETTINGS
To browse through the filter settings, proceed as follows:
1. Select
Settings > Filter.
2. Press the
OK
button.
3. The summary display of Filter status opens.
4. This display shows the following information:
Ć
Filters changed
— Indicates the date when the filter was
last replaced.
Ć
Next reminder
— Indicates the date when a reminder to
replace the filter will next be shown.
Ć
Reminder interval
— Indicates the filter replacement
interval in months.
SETTING THE DATE THE FILTER WAS LAST
CHANGED
This section describes how to enter information on replacing the
filter of the Vallox ventilation unit. Replacing the filter is described in
the Vallox ventilation unit maintenance instructions.
To set the date when you replaced the Vallox ventilation unit filter,
proceed as follows:
1. Select
Settings > Filter.
2. Press the
OK
button.
3. The summary display of Filter status opens.
4. Press the
Edit
button.
5.
The Filter status
display 1/2 opens.
6. Press the
Plus
button. The
Filters changed
field value
changes to
Today.
7. Press the
OK
button.
