15
© Vallox • We reserve the right to make changes without prior notice
EXPERT SETTINGS
SETUP WIZARD
AWAY PROFILE
To make the Away profile settings, proceed as follows:
1. The setup wizard for
Away
profile opens.
NOTE
Once you have set the fan speed for the At home profile, the fan
speed for the Away profile will by default be set to -30% of the At
home profile fan speed. It is recommended that this fan speed
setting be used for the Away profile. However, the setting can be
changed as required.
2. Use the
Plus
and
Minus
buttons to set the
Away
profile fan
speed as a percentage of the maximum output ratio.
3. The
Away
profile fan speed value is now set.
4. Press the
Right arrow
button.
5. The temperature setup opens.
6. Set the desired supply air temperature for the
Away
profile
by using the
Plus
and
Minus
buttons. You can adjust the
temperature in the range +10°C ... +25°C.
7. The
Away
profile supply air temperature is now set.
8. Press the
Right arrow
button.
9. The setup for automatic fan speed control based on the
relative humidity opens.
10. Use the
Plus
and
Minus
buttons to select whether the
automatic fan speed control, based on the relative humidity
of air, is used or not.
11. The automatic fan speed control, based on the relative
humidity of air, is now set.
12. Press the
Right arrow
button.
13. The setup for automatic fan speed control based on the
carbon dioxide level opens.
14. Use the
Plus
and
Minus
buttons to select whether the
automatic fan speed control, based on the carbon dioxide
level, is used or not.
15. The automatic fan speed control, based on the carbon
dioxide level, is now set.
16. Press the
OK
button.
