22
VENTILATION PROFILES
USING THE UNIT
VIEWING THE BOOST PROFILE INFORMATION
To view the Boost profile settings, proceed as follows:
1. Open the main display of the
Boost
profile.
2. Press the
Profile information
button.
3. The first information display for the profile opens.
This display shows the following information:
Ć
Supply air
— Indicates the temperature of the air blown to
the apartment and its set value (in brackets), if the supply air is
warmer than the set value.
•
Outdoor air
— Indicates the outdoor air temperature.
Ć
Fan speed
— Indicates the fan speed. If the automatic fan
speed
boost
is turned on, the set value is shown in brackets
first followed by the actual fan speed.
•
Cell status
— Indicates the status of the ventilation unit heat
recovery cell. Possible statuses are:
Ć
Heat recovery
— The heat recovery cell heats the air
streaming in from outdoors.
Ć
Cooling
— The heat recovery cell cools the air streaming
in from outdoors.
Ć
Cell bypass
— The inflowing air bypasses the heat
recovery cell.
Ć
Defrosting
— The heat recovery cell is being defrosted.
4. Press the
Right arrow
button.
5. The second information display for the profile opens.
This display shows the following information:
•
Humidity
— Indicates the highest relative humidity of air
measured by the sensors.
•
Carbon dioxide
— Indicates the highest carbon dioxide
level measured by the sensors.
•
Change filters
— Indicates the next recommended filter
change date.
•
Days in use
— Indicates how long the unit has been running.
VIEWING THE FIREPLACE PROFILE INFORMATION
To view the Fireplace profile settings, proceed as follows:
1. Open the main display of the
Fireplace profile
:
2. The main display of the profile shows a summary of the profile
data. Also see Table 2, "Profile symbols".
3. Press the
Profile information
button.
