16
SETUP WIZARD
EXPERT SETTINGS
BOOST PROFILE
To make the Boost profile settings, proceed as follows:
1. The setup wizard for
Boost
profile opens.
NOTE
Once you have set the fan speed for the At home profile, the fan
speed for the Boost profile will by default be set to +30% of the At
home profile fan speed. It is recommended that this fan speed
setting be used for the Boost profile. However, the setting can be
changed as required.
2. Use the
Plus
and
Minus
buttons to set the
Boost
profile fan
speed as a percentage of the maximum output ratio.
3. Press the
Right arrow
button.
4. The temperature setup opens.
5. Set the desired supply air temperature for the
Boost
profile
by using the
Plus
and
Minus
buttons. You can adjust the
temperature in the range +10°C ... +25°C.
6. Press the
Right arrow
button.
7. The setup for automatic fan speed control based on the
relative humidity opens.
8. Use the
Plus
and
Minus
buttons to select whether the
automatic fan speed control, based on the relative humidity
of air, is used or not.
9. Press the
Right arrow
button.
10. The setup for automatic fan speed control based on the
carbon dioxide level opens.
11. Use the
Plus
and
Minus
buttons to select whether the
automatic fan speed control, based on the carbon dioxide
level, is used or not.
12. Press the
Right arrow
button.
13. A display for setting the profile timer opens.
14. Use the
Plus
and
Minus
buttons to select whether the profile
timer function is used or not. The options are:
Ć
On
— When the timer is on, the
Boost
profile is used only
for the period specified in the timer.
Ć
Off
— When the timer is off, the
Boost
profile is used until
you (or the Week clock) change the profile.
15. Press the
Right arrow
button.
16. A display for setting the profile timer duration opens.
17. Set the profile timer duration in minutes by using the
Plus
and
Minus
buttons.
18. Press the
OK
button.