Valleylab SurgiStat II-20, User Manual

Page: 6 / 68

SurgiStat II-20 User’s Guide vii
List of Figures
Figure 2-1. Layout of controls, indicators, and receptacles on the front panel
2-2
Figure 2-2. Controls for the Cut and Blend modes
2-3
Figure 2-3. Controls for the Desiccate, Fulgurate, and Bipolar modes
2-4
Figure 2-4. Indicators for power, return electrodes, and footswitch control
2-5
Figure 2-5. Location of the unit power switch and front panel receptacles
2-6
Figure 2-6. Layout of connectors and controls on the rear panel
2-7
Figure 8-1. Output power vs. impedance for Pure Cut mode
8-8
Figure 8-2. Peak voltage vs. power setting for Pure Cut mode
8-8
Figure 8-3. Output power vs. generator settings for Pure Cut mode
8-9
Figure 8-4. Output power vs. impedance for Blend mode
8-9
Figure 8-5. Peak voltage vs. power setting for Blend mode
8-10
Figure 8-6. Output power vs. generator settings for Blend mode
8-10
Figure 8-7. Output power vs. impedance for Desiccate mode
8-11
Figure 8-8. Peak voltage vs. power setting for Desiccate mode
8-11
Figure 8-9. Output power vs. generator settings for Desiccate mode
8-12
Figure 8-10. Output power vs. impedance for Fulgurate mode
8-12
Figure 8-11. Peak voltage vs. power setting for Fulgurate mode
8-13
Figure 8-12. Output power vs. generator settings for Fulgurate mode
8-13
Figure 8-13. Output power vs. impedance for Bipolar mode
8-14
Figure 8-14. Peak voltage vs. power setting for Bipolar mode
8-14
Figure 8-15. Output power vs. generator settings for Bipolar mode
8-15