Valley VRI-iS, Installation Manual

Page: 61 / 102

61
Troubleshooting
ICON5 / ICONX
VRI-iS Diagnostics (Continued)
Test Valve
Use to test valves for proper operation with water on
or off. This feature will turn all valves on and then turn
the valve number entered to off.
This setting will be maintained for 5 minutes or until
a different valve is commanded off. After 5 minutes
the control panel resorts back to the programmed
settings.
NOTE
• System should be running with water on to
test valve operation.
1. Push
Menu
,
Programs
, and
VRI
to display the
VRI-iS screen. See Figure 61-1.
2. Push the
VRI-iS Diagnostics
button.
3. Select the Valve # field and set the valve number
using the numeric keypad.
4. Push the
Test Valve
button to display the Test
Valve screen.
5. When prompted to turn the valve off for 5 minutes
push the
Yes
button.
4
1
3
2
5 6
Figure 61-1 1. VRI-iS Diagnostics
2. Valve #
3. Test Valve
4. Yes
5. Test Valve Running Indicator
6. Stop Test Valve