Operation
Valley ClassicPlus Control Panel
29
Safety Override Button
The Valley ClassicPlus Control Panel is equipped
with a safety override push button switch. See Fig-
ures 29-1 and 29-2.
Should the system misalign for some reason and it is
necessary to override the safety circuit momentarily
to realign the system, this switch may be used.
To use the by-pass function, depress the safety over-
ride button in conjunction with the START switch.
!
CAUTION
• CAUTION MUST BE TAKEN BY THE OPERATOR WHEN THIS BUTTON IS DEPRESSED AS IT WILL
BY-PASS OR DISABLE ALL OF THE SYSTEM’S SAFETY CIRCUITS.
• NEVER DEPRESS THIS BUTTON FOR MORE THAN 3 TO 5 SECONDS.
• IF THE SYSTEM IS NOT IN FULL VIEW BY THE OPERATOR, IT IS NOT RECOMMENDED THAT THE
SAFETY OVERRIDE SWITCH BE USED.
• THE OPERATOR MUST INSPECT THE ENTIRE SYSTEM BETWEEN EACH START ATTEMPT.
• REPEATED OVERRIDE START ATTEMPTS CAN CAUSE SEVERE STRUCTURAL DAMAGE.
• CALL THE LOCAL VALLEY DEALER SHOULD THE SYSTEM FAIL TO START.
ClassicPlus
AUTO
REVERSE
AUTO
STOP
LINEAR
PIVOT
1
2
Figure 29-2
1. Press Simultaneously to Override Safety
2. Notice Caution Decal
Figure 29-1
Caution Decal
